How to maintain the Automatic Pig Farm Clearing Scraper Machine?

2021-11-22

1. When the Automatic Pig Farm Clearing Scraper Machine runs off the side of the passive drum at the head end, it can be adjusted by tightening the bolts on the tension rod.
When moving one-third of the way back, loosen the bolts appropriately to prevent the cleaning belt from running too far.
2. When the manure removal belt runs off the edge of the passive drum, you can release the tensioning chain, move the manure removal belt to the middle of the passive drum by hand, then install the tensioning chain on the sprocket, and then tighten it with a pipe wrench The hexagonal shaft can not move, and finally tighten the bolts on the tension rod.
3. If the Automatic Pig Farm Clearing Scraper Machine appears to be rolled up, just spread the manure removal belt on the passive roller and spread it flat. Never cut.

4. After using for a period of time, the dung removal belt will be prolonged and loose, so it needs to be cut off for a while and then re-welded. Be sure to buy an ultrasonic plastic welding machine. When welding, the two ends must be aligned and must not be skewed.


We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy